Seametrics Insertion Paddlewheel the IP100/200-Series are adjustable depth insertion paddlewheels that come in brass, PVC, or 316 stainless models to fit 3” to 40” pipe. Adapters mate with standard 1-1/2” (11x/21x) or 2” (15x/25x), or PVC (11x/21x) NPT threaded fittings such as saddles and weldolets which may be purchased either locally or from Seametrics.
Seametrics Insertion Paddlewheel Features
- Wide flow range
- One moving part
- Hot tap available
- Modular electronics compatible
- Easily depth adjustable for 3” to 40” pipe
|
Another Article: |
Application
- Clean water
- Large pipes
- Aquariums, water parks
- Water & wastewater monitoring
Specification
| Pipe Size | 3” to 40” | ||||
| Power | Low Power: 6-36 Vdc/< 2 mA Micropowered (-04 Option): 3.1-16 Vdc/60 μA @ 3.6 Vdc |
||||
| Sensor | Low Power: Digital Magnetoresistive Micropowered (-04 Option): Giant Magnetoresistance (GMR) |
||||
| Materials | Housing | Powder-coated cast aluminum | |||
| Tubing/Fitting/Sensor Housing | Brass, PVC, or 316 Stainless Steel | ||||
| Rotor | PVDF (Kynar®) | ||||
| Shaft | Kynar® /Tungsten Carbide (Kynar® /Ceramic or Kynar®/Silicon Carbide optional) | ||||
| Bearings | Ruby jewel | ||||
| O-Ring (15x/25x only | EDPM | ||||
| Valve Assembly for: | IP11x/21x (Brass/SS) | IP11x/21x (PVC) | IP15x/25x (Brass/SS) | IP15x/25x (PVC) | |
| None | None | Bronze (316SS optional) | Uses gate valve | ||
| Fitting Size Required | 1.5” FNPT | 2” FNPT | 2” FNPT | 2” FNPT | |
| Maximum | Pressure | Brass/SS: 200 psi (14 bar) PVC: 150 psi (10 bar) |
|||
| Temperature | Brass/SS: 200˚ F (93˚ C) PVC: 130˚ F (55˚ C) |
||||
| Flow Velocity | 0.3 to 30 ft/sec (0.09 to 9.14 m/sec) | ||||
| Accuracy | ± 1.5% of full scale | ||||
| Output Transistor Maximum Current Sinking | 150mA (low power version only) | ||||
| Cable | #22 AWG 3-con, 18’ (6m); 2,000’ (610m) maximum cable run Note: 50’ (15m) maximum for battery-powered or micropowered versions. |
||||
| Environmental | See meter mounted electronic specification for rating. | ||||
| Regulatory |  Mark (applies to full power sensor only configuration and full power FT 430/440/450 mounted configurations) |
||||
Download Datasheet: Seametrics IP100/200 & IP150/250